|
We ship worldwide, all International Orders will require Wire Transfer or Pay Pal payment only.
Click Here For More Info!
We gladly accept the following payment methods
|
 |
- Celebrating 30 Years of Mustang Parts & Accessories Sales and Performance Installs! -
CYLINDER HEADS, EDELBROCK, E-STREET, SBF, 1.90" VALVE, PAIR
 |
NEW from Edelbrock - E-Street™ for S/B Ford
E-Street™ cylinder heads are an all new line of Edelbrock heads designed for entry-level street performance engines, ideal for operating in the idle to 5,500 rpm range. Manufactured in the USA, by Edelbrock, these heads feature A356 aluminum castings that are heat treated to T-6 spec for superior casting strength and quality. Their modern combustion chamber designs improve the combustion process and larger than stock intake and exhaust ports move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. Dyno tests showed a gain of 16 hp and 11 ft/lbs of torque over our overseas competitor.
Every E-Street is assembled with manganese bronze valve guides, powder metal interlocking valve seats, stainless steel one-piece valves with hardened tips, 1.25" diameter valve springs, 3/8" screw-in studs and guide plates. Additional qualities include hardened spring cups for long-term wear protection and Heli-coil™ threaded inserts in the rocker stud bosses for increased strength; these are the details that most low-cost competitors leave out of their heads. All E-Street cylinder heads are sold in pairs and Made in the USA.
Made in the USA
Entry level street performance upgrade
A356 aluminum treated to T-6 spec
Larger than stock intake and exhaust ports for increased power
Modern combustion chamber design for improved efficiency and mileage potential
Heli-coil threaded inserts in the rocker stud bosses for proper torque load without damaging threads
Hardened spring cups between the valve springs and casting for wear protection
Available for Small-Block Chevy and Small-Block Ford - sold in pairs
Edelbrock quality and performance at an AFFORDABLE PRICE - see your local dealer today
Technical Notes: Use with hydraulic camshafts .550" max lift. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Requires hardened pushrods. 289-302 cid with 7/16" head bolts requires #9680 head bolt bushing kit. 1.90" heads are ideal for stock pistons; 2.02" heads require additional piston to valve clearance. Not legal for sale or use on pollution controlled motor vehicles.
|
|
|
|
|
|
GASKET, INTAKE MANIFOLD, 1970-1973, 351C, 4V
$34.99
|
|
|
OIL PUMP PICK UPS SCREEN, 1965-1973, FRONT SUMP
$22.99
|
|
|
INTAKE PLENUM COVER, 2005-2010, GT
$88.99
|
|
|
CAMSHAFTS, 4.6, 4V, 269/267-.475/.450, COMP CAMS
$1301.99
|
|
|
Send to friend
|
Customer area
Cart is empty
